| Sea and Sea MDX-D300 SLR Housing
Product # S06134
Free ground shipping in the Continental US |
Uses a lightweight and durable aluminum body that can withstand even the most severe shooting environments
The aluminum material used in the MDX series housings realizes a body that is both lightweight and strong. Because we envisioned photographers’ harsh usage environments, the body was successfully brought to an even higher level of perfection through the implementation of anodized aluminum processing. The all-new high-rigidity, high-durability, high-precision MDX series demonstrates the highest levels of performance under a variety of shooting conditions. |
 |
| |
|
Manual adjustment is possible without releasing the grips
Designed for easy operation so you can comfortably reach the main dial and quick control dial with your fingers, while keeping your hands on the grips. Delicate operations are possible even while you are looking through the viewfinder. The larger diameter of frequently-used dials allows you to change the shutter speed or aperture value with a light touch while supporting the framing. This frees you, the photographer, to concentrate only on the perfect chance for a great picture. |
 |
| |
|
TTL converter connector employed as standard
The included type-N 5-pin wired connector accepts the optional YS Converter/N. The converter works with the YS-Series strobes to provide automatic TTL flash adjustment.
The converter requires the 5-pin Sync Cord/N for connecting to a strobe.
*The MDX-D300 housing comes from the factory with these type-N connectors: one 2-pin wired connector and one 5-pin wired connector.
*To use two SEA&SEA YS-Series strobes with the factory-equipped type-N connectors, you must use the 5-pin Dual Sync Cord/N. |
- The housing is protected by a highly corrosion resistant anodized (black) coating. The coating protects the housing from environmental corrosion and abrasions.
-
Comes standard with two kinds of type-N connectors: one 2-pin wired connector (for manual) and one 5-pin wired connector (for dedicated TTL).
-
Equipped with a Optical Viewfinder 0.66x standard. Interchangeable 0.5x/0.8x viewfinders (optional) are also available.
-
The quick shoe makes the camera easy to install and remove from the housing.
-
A port lock mechanism secures the port from accidental loosening.
-
A built-in leak sensor immediately alerts you to any water leakage.
-
Strong and durable build, with a depth rating of up to 60 m / 200 ft.
|
| [Construction |
Body: corrosion-resistant aluminum alloy (machined) / anodized body
Grip: corrosion-resistant die-cast aluminum alloy |
| Depth rating |
60m / 200ft |
| Dimensions (WxHxD) |
330 x 163 x 136mm / 13.2 x 6.5 x 5.4 inch |
| Weight |
Approx. 2500g / 87.5oz (Housing only) |
| Includes |
Housing body cap, camera quick shoe, hex wrench, CR2032 lithium battery, attachment tool |
|
